We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Stand-alone Gigabit Ethernet Media and Rate Converter, 10/100/1000Base-T to 1000Base-SX/LX
Article ID
SGFEB1014-130
10/100/1000Base-T (RJ-45) [100 m/328 ft.] to
1000Base-LX 1310nm single mode (SC) [10
km/6.2 mi.] Link Budget 10.5dB
Description
The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrated fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber.
Features
- Auto Negotiation
- Auto-MDI/MDIX
- Link Pass Through
- Far End Fault (FEF)
- Remote Fault Detect
- Provides rate conversion while also increasing transmission distances
- Supports multimode or single mode fiber
- Versions available with fixed SC or LC optics, as well as modular SFP optics
- Long haul transmission distances are supported with a variety of SFP modules
- SFP ports support dual speeds: 100/1000/SGMII
- Multiport versions provide 3 or 4 port switch functionality or provide redundant fiber links
- Supports IEEE 802.3az Energy Efficient Ethernet
Show product on manufacturers website: https://www.transition.com/products/media-converters/sgfeb10xx-130-series/
Specifications
Standards | IEEE 802.3 IEEE 802.3ab IEEE 802.3u IEEE 802.3z IEEE 802.3az |
Data Rate | Copper: 10/100/1000 Mbps Fiber: 1000 Mbps, 100 Mbps also supported via SFP port |
Filtering Addresses | 8K MAC addresses |
Max Frame Size | 10,260 byte Jumbo Frames |
Dip Switch | Two Port Models Switch 1: TP1 - Auto-Negotiation Enable / Disable Switch 2: TP1 â Force 100Mbps or 10Mbps with switch 1 disabled Switch 3: TP1 â Force Full or Half-Duplex with switch 1 disabled Switch 4: Link Pass Through Enable / Disable Switch 5 & 6: Controls the Fiber SFP port for 1000M, 100M, or SGMII Multiport Models with additional 4 position dip-switch: Switch 1 & 2: Controls the 2nd Fiber SFP port for 1000M, 100M, or SGMII Switch 3 & 4: Fiber Redundancy Enable/Disable, Revertive Mode, and Fiber P2/P3 blocking |
Status LEDs | PWR (Power): On = Power is provided to converter LACT (Fiber Link/Activity): On = Link, Blink = Activity RJ-45 Upper Left (TPLink/Activity/Duplex): Green = Link Full-Duplex, Blink = Activity, Amber = Link Half-Duplex, Blink = Activity RJ-45 Upper Right (Speed): Green = 1000Mbps, Amber = 100Mbps, Off = 10Mbps |
Dimensions | Width: 3.25″ [82 mm] Depth: 4.8″ [122 mm] Height: 1" [25 mm] |
Power Consumption | 2.2 Watts |
Power Input | 7.5 to 24 VDC, Provided by wide input AC Wall Mount Adapter |
Environment | Operating: 0°C to 50°C Storage: -15°C to 65° C Humidity: 5% to 95% (non-condensing) Altitude: 0 â 10,000 ft. |
Weight | 2 lbs. [0.90 kg] |
Compliance | EN55022 Class A, EN55024, FCC Class A, CE Mark Safety: Wall Mounted Power Supply: UL Listed, UL60950 and CSA Certified |
Warranty | Lifetime |
Delivery time | 5-10 working days |
---|---|
Systems | Lantronix / Transition Networks |
Mediaobjects | |
Form factor | Stand-alone Media Converter |
Media Converter type | Full-Featured Conversion/Standard Size |
Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Type of conversion | Copper to Fiber |
Environment | Office/Commercial Grade |
PoE | No PoE |
Carrier Ethernet | No |